Free guide available on safe trailer coupling

The FTA has worked with other industry bodies on the production of a free industry guide to the safe coupling and uncoupling of vehicle trailers.

The Freight Transport Association (FTA) has contributed to the draft of new guidance on the safe coupling, uncoupling and parking of commercial vehicles and trailers.

The ‘Safe coupling and uncoupling guide’ is intended to assist employers, those who control sites where coupling and uncoupling is undertaken by users of large goods vehicles, managers, self-employed drivers and driver training bodies. It has been developed by the freight industry as a good practice guide with the aim of reducing the likelihood of a runaway or rollaway incident.

The guide has been produced by an industry working group made up of members of the Transport and Logistics Forum, which is chaired by the Health & Safety Executive (HSE). The FTA was instrumental in the drafting of the guidance and has worked closely with HSE and other industry bodies during the drafting process.

In her introduction to the guide, Sarah Bell, the Traffic Commissioner representative on the Transport and Logistics Forum, says: “Tragically, each year there are a number of fatalities or serious injuries due to vehicle runaways or trailer rollaways. The cause is often because the individual in charge mistakenly believes that all brakes are engaged when they are not. This should not happen if simple procedures are followed.”

Andy Mair, the FTA’s Head of Engineering, said: “Vehicle and trailer runaway incidents are a serious concern for FTA members, the consequences of which can often be fatal. This new guidance will be welcomed by members who will be able to put it into practical use for the training of drivers and used as a benchmark for risk assessment of their procedures, site and systems to ensure safe coupling and uncoupling of trucks and trailers.”

The guide includes practical information on how truck and trailer parking brake systems operate and step by step photographic sequences for the coupling and uncoupling procedures which should be adopted by drivers.

Andy Mair concluded: “Research by the Health and Safety Laboratory suggests that many drivers do not understand how truck and trailer parking brakes operate, which is a key requirement in the coupling and uncoupling procedure.  The guide aims to address some of the common misunderstandings, includes a clear and understandable explanation, and shows that in most cases drivers incorrectly believe that disconnecting the coupling air lines applies the trailer parking brake.”

The ‘Safe coupling and uncoupling guide’ is available free of charge from the FTA website.

Tags:
, ,

Categories:
Industry News

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code

WordPress Anti-Spam by WP-SpamShield